Chemical Raw Materials Melamine Formaldehyde Resin Powder 99.8% Urea Molding Compound Melamine Powder

• Customization: Available
• CAS No.: 9003-08-1
• Formula: (C3h6n6CH2o)X
• Model NO.: Urea Resin
• EINECS: 9003-08-1
• Color: Customized
• Colour: Customization
• Sample: Sample Free for 1kg, But Freight Charge on Custome
• Advantage: Factory Price, Timely Delivery
• Service: OEM, ODM
• Transport Package: Plastic Bag, Inner One Layer Thin Film
• Specification: 25Kg/Bag
• Trademark: Dongxin
• Origin: Jiangxi, China
• HS Code: 3909100000
• Production Capacity: 6000mt/Month

Product Description

Introduction 
Melamine molding compounds is suitable for both compression and injection molding and are available in fine powder and granular forms,And in an unlimited range of colors. UF and MF molding compounds can be used to produce many products.
1.Kitchen utensils and kitchen ware, imitation ceramic dinnerware, tableware (plates, cups, mugs, saucers, ladles, spoons,bowls and dishes), melamine crockery.

2.Entertainment products, such as dominoes, dice, mahjong, chess and so on.

3.Daily necessities: imitation porcelain, resin craft, imitation pearls, ashtray, coat buttons and pins, sanitary accessories, toilet seat.

4.Electrical appliance: switch, sockets, wall-plates, MCB, wiring equipment, lamp holder, electric lamp socket, relay, plug outlet connector.
 

Parameter

ITEM	SPECIFICATION	RESULTS
APPEARANCE	WHITE CRYSTALLINE POWDER	COMPLIES
WATER (%)	0.1 MAX	0.04
ASH (%)	0.03 MAX	0.01
PH VALUE	7.5-9.5	8.4
KAOLINE TURBIDITY	20	5.0
SHADE (HAZEN)	20	10.0

Specification

Application	100% melamine
Highest temperature (For tableware )	140ºC
Lowest temperature (For tableware )	-30ºC
General Molding temperature	155-165C (customized as your machine condition )
Toxicity	Non-toxic
Expression of tableware when heated	Keeps the shapes and color under -20 degree centigrade to 140 degree centigrade
Appearance of molded tableware	Like ceramic

CERIFICATE OF ANALYSIS

1	Gravity	D2525,≤	1.6	GB1033
2	Specific volume	ml/g≤	3
3	Volatile matter	%,≤	3.8	GB/T13455
4	Water absorb (cold) / (hot)	mg,≤	50/65	GB1034
5	Shrinkage	%	0.65	GB13454
6	Distortion temperature	°O,≥	155	GB1634
7	Flowing	mm	194	GB13454
8	Impact Strength(notch)	KJ/m^2,≥	1.9	GB1043
9	Bending Strength	Mpa,≥	80	GB9341
10	Insulation Resistance after 24h in water	MΩ≥	10^5	GB1410
11	Dielectric strength	MV/m,≥	9.0	GB1408

Packing&Delivery
Plastic knitting bag with inner one to two layer thin film bags. 25kg/bag
Storage: Kept in airy, dry and cool room.
Storage period: six months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used.
Transportation Caution: avoid moisture, heat, dirt and packaging damage

FAQ
1.Are you a manufacturer or trading company?
We are the largest factory in this industry with 80000 square meters and we have our own trading company and technical team to resolver all  proplems during the production.
 

2. Can you make the material according to my needed color?

Sure, there are two ways to confirm the color:

(1) sending us sample

(2) inform us the Panton code/Raul color number.

3. I want to start with a small quantity to try your product, what is the MOQ?

   MOQ: 3tons

4. can you send some sample for testing in our side?

   Sample within 1kg can be provided free, you only need to bear the courier cost, usually 95$ for 1kg.
5. How long time it takes if i want to buy 1container?

It depends on the order schedule in our production department, the normal time is one week for production.

6. What is your accepted payment terms?

 

TT or LC, while there will be additional banking charges of 400$ based on LC, pls take this into consideratin.